freebsd-current
[Prev] Thread [Next] | [Prev] Date [Next]
Re: zpool scrub errors on 3ware 9550SXU Freddie Cash Mon Jun 15 05:02:42 2009
On Sat, Jun 13, 2009 at 3:11 PM, ian j hart <[EMAIL PROTECTED]> wrote: > [long post with long lines, sorry] > > I have the following old hardware which I'm trying to make into a storage > server (back story elided). > > Tyan Thunder K8WE with dual Opteron 270 > 8GB REG ECC RAM > 3ware/AMCC 9550SXU-16 SATA controller > Adaptec 29160 SCSI card -> Quantum LTO3 tape > ChenBro case and backplanes. > 'don't remember' PSU. I do remember paying £98 3 years ago, so not cheap! > floppy > > Some Seagate Barracuda drives. Two old 500GB for the O/S and 14 new 1.5TB > for > data (plus some spares). > > Astute readers will know that the 1.5TB units have a chequered history. > > I went to considerable effort to avoid being stuck with a bricked unit, so > imagine my dismay when, just before I was about to post this, I discovered > there's a new issue with these drives where they reallocate sectors, from > new. > > I don't want to get sucked into a discussion about whether these disks are > faulty or not. I want to examine what seems to be a regression between > 7.2-RELEASE and 8-CURRENT. If you can't resist, start a thread in chat and > CC > me. > > Anyway, here's the full story (from memory I'm afraid). > > All disks exported as single drives (no JBOD anymore). > Install current snapshot on da0 and gmirror with da1, both 500GB disks. > Create a pool with the 14 1.5TB disks. Raidz2. > Are you using a single raidz2 vdev using all 14 drives? If so, that's probably (one of) the source of the issues. You really shouldn't use more than 8 or 9 drives in a singel raidz vdev. Bad things happen. Especially during resilvers and scrubs. We learned this the hard way, trying to replace a drive in a 24-drive raidz2 vdev. If possible, try to rebuild the pool using multiple, smaller raidz (1 or 2) vdevs. -- Freddie Cash [EMAIL PROTECTED] _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
- zpool scrub errors on 3ware 9550SXU ian j hart
- Re: zpool scrub errors on 3ware 9550SXU Freddie Cash <=
- Re: zpool scrub errors on 3ware 9550SXU ian j hart
- Re: zpool scrub errors on 3ware 9550SXU Freddie Cash
- Re: zpool scrub errors on 3ware 9550SXU ian j hart
- Re: zpool scrub errors on 3ware 9550SXU Kip Macy
- Re: zpool scrub errors on 3ware 9550SXU ianjhart
- Re: zpool scrub errors on 3ware 9550SXU ianjhart