Loading...

android-porting@googlegroups.com

[Prev] Thread [Next]  |  [Prev] Date [Next]

Re: [android-porting] Porting from rowboat android to Gumstix fire Overo Module Manish Shakya Fri Jul 15 18:00:07 2011

Right now I am trying to move from linux kernel 2.6.32 to 2.6.37 and use
gingerbread 2.3.4.

With linux kernel 2.6.32, froyo and gb 2.3.3 are working fine. I used same
uboot arg as in earlier mail.

On Fri, Jul 15, 2011 at 11:22 AM, hedwin <[EMAIL PROTECTED]> wrote:

> Do you use froyo or gingerbread?
>
>
>
> On Fri, Jul 15, 2011 at 3:57 PM, manish shakya <[EMAIL PROTECTED]>wrote:
>
>> Yes, Both console and android.console is pointing to correct serial device
>> i.e. ttyS2.
>>
>> My uboot args is
>>
>> console=ttyS2,115200n8 androidboot.console=ttyS2 root=/dev/mmcblk0p2 rw
>> rootfstype=ext3 rootwait init=/init vram=12M omapfb.mode=dvi:[EMAIL 
>> PROTECTED]
>>
>> Isn't this correct?
>>
>>
>> On Fri, Jul 15, 2011 at 5:44 AM, hedwin <[EMAIL PROTECTED]> wrote:
>> >
>> > Check if console and android.console point to the correct serial device.
>> > Both a kernel parameters sent by u-boot.
>> >
>> > Cheers,
>> >
>> > Hedwin
>> >
>> > On Thu, Jul 14, 2011 at 9:45 PM, Manish Shakya <
>> [EMAIL PROTECTED]> wrote:
>> >>
>> >> Hi ,
>> >>
>> >> I am wondering what are the changes to be made if I have to make to
>> port rowboat to gumstix overo module.
>> >>
>> >> I did following things but it didn't worked. :-(
>> >> I made change in config file , board-overo.c and also added LCD driver.
>> Compilation went fine with out errors.
>> >> But when I tried to run the image. It show following log and gets
>> stuck.
>> >>
>> >> 2731240 bytes read
>> >> ## Booting kernel from Legacy Image at 82000000 ...
>> >>    Image Name:   Linux-2.6.37-g06ebbba
>> >>    Image Type:   ARM Linux Kernel Image (uncompressed)
>> >>    Data Size:    2731176 Bytes = 2.6 MiB
>> >>    Load Address: 80008000
>> >>    Entry Point:  80008000
>> >>    Verifying Checksum ... OK
>> >>    Loading Kernel Image ... OK
>> >> OK
>> >>
>> >> Starting kernel ...
>> >>
>> >> Uncompressing Linux... done, booting the kernel.
>> >>
>> >>
>> >> --
>> >> Manish Shakya
>> >> http://www.manishshakya.com.np
>> >>
>> >> --
>> >> unsubscribe: [EMAIL PROTECTED]
>> >> website: http://groups.google.com/group/android-porting
>> >
>>
>>
>>
>> --
>>
>> Manish Shakya
>> http://www.manishshakya.com.np
>> http://secs.oakland.edu/~ganesan/iMX/
>>
>
>


-- 
Manish Shakya
http://www.manishshakya.com.np
http://secs.oakland.edu/~ganesan/iMX/

-- 
unsubscribe: [EMAIL PROTECTED]
website: http://groups.google.com/group/android-porting