Loading...

android-porting@googlegroups.com

[Prev] Thread [Next]  |  [Prev] Date [Next]

Re: [android-porting] Porting from rowboat android to Gumstix fire Overo Module Manish Shakya Fri Jul 15 18:00:13 2011

Thanks got it.

I think, this changes should be wrote in rowboat wiki. I wasted 2/3 days.


On Fri, Jul 15, 2011 at 2:04 PM, hedwin <[EMAIL PROTECTED]> wrote:

> its in omap-serial.h in arch/arm/plat-omap/include/plat
>
>
> On Fri, Jul 15, 2011 at 7:58 PM, Manish Shakya <[EMAIL PROTECTED]>wrote:
>
>> Thanks.Yes, you were right.  I tried replacing with O with S. Now I can
>> see logs in the console.
>>
>> Can you tell me where in the source code it says use ttyO instead of ttyS?
>> I couldn't find in the source.
>>
>> Manish
>> On Fri, Jul 15, 2011 at 11:53 AM, Manish Shakya <
>> [EMAIL PROTECTED]> wrote:
>>
>>>
>>> What do you mean?
>>>
>>> so now uboot  args should look something like this
>>> console=ttyS2,115200n8 androidboot.console=ttyO2 root=/dev/mmcblk0p2 rw
>>> rootfstype=ext3 rootwait init=/init vram=12M omapfb.mode=dvi:480x272MR-16@
>>> 60 omapdss.def_disp=lcd43
>>>
>>> Is this change in gingerbread 2.3.4 only?
>>>
>>> Manish
>>>
>>>
>>> On Fri, Jul 15, 2011 at 11:48 AM, hedwin <[EMAIL PROTECTED]>wrote:
>>>
>>>> in gingerbread ttyS changed to ttyO
>>>>
>>>> Hedwin
>>>>
>>>>
>>>> On Fri, Jul 15, 2011 at 5:44 PM, Manish Shakya <
>>>> [EMAIL PROTECTED]> wrote:
>>>>
>>>>> Right now I am trying to move from linux kernel 2.6.32 to 2.6.37 and
>>>>> use gingerbread 2.3.4.
>>>>>
>>>>> With linux kernel 2.6.32, froyo and gb 2.3.3 are working fine. I used
>>>>> same uboot arg as in earlier mail.
>>>>>
>>>>> On Fri, Jul 15, 2011 at 11:22 AM, hedwin <[EMAIL PROTECTED]>wrote:
>>>>>
>>>>>> Do you use froyo or gingerbread?
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Jul 15, 2011 at 3:57 PM, manish shakya <[EMAIL PROTECTED]>wrote:
>>>>>>
>>>>>>> Yes, Both console and android.console is pointing to correct serial
>>>>>>> device i.e. ttyS2.
>>>>>>>
>>>>>>> My uboot args is
>>>>>>>
>>>>>>> console=ttyS2,115200n8 androidboot.console=ttyS2 root=/dev/mmcblk0p2
>>>>>>> rw rootfstype=ext3 rootwait init=/init vram=12M
>>>>>>> omapfb.mode=dvi:[EMAIL PROTECTED] omapdss.def_disp=lcd43
>>>>>>>
>>>>>>> Isn't this correct?
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jul 15, 2011 at 5:44 AM, hedwin <[EMAIL PROTECTED]>
>>>>>>> wrote:
>>>>>>> >
>>>>>>> > Check if console and android.console point to the correct serial
>>>>>>> device.
>>>>>>> > Both a kernel parameters sent by u-boot.
>>>>>>> >
>>>>>>> > Cheers,
>>>>>>> >
>>>>>>> > Hedwin
>>>>>>> >
>>>>>>> > On Thu, Jul 14, 2011 at 9:45 PM, Manish Shakya <
>>>>>>> [EMAIL PROTECTED]> wrote:
>>>>>>> >>
>>>>>>> >> Hi ,
>>>>>>> >>
>>>>>>> >> I am wondering what are the changes to be made if I have to make
>>>>>>> to port rowboat to gumstix overo module.
>>>>>>> >>
>>>>>>> >> I did following things but it didn't worked. :-(
>>>>>>> >> I made change in config file , board-overo.c and also added LCD
>>>>>>> driver. Compilation went fine with out errors.
>>>>>>> >> But when I tried to run the image. It show following log and gets
>>>>>>> stuck.
>>>>>>> >>
>>>>>>> >> 2731240 bytes read
>>>>>>> >> ## Booting kernel from Legacy Image at 82000000 ...
>>>>>>> >>    Image Name:   Linux-2.6.37-g06ebbba
>>>>>>> >>    Image Type:   ARM Linux Kernel Image (uncompressed)
>>>>>>> >>    Data Size:    2731176 Bytes = 2.6 MiB
>>>>>>> >>    Load Address: 80008000
>>>>>>> >>    Entry Point:  80008000
>>>>>>> >>    Verifying Checksum ... OK
>>>>>>> >>    Loading Kernel Image ... OK
>>>>>>> >> OK
>>>>>>> >>
>>>>>>> >> Starting kernel ...
>>>>>>> >>
>>>>>>> >> Uncompressing Linux... done, booting the kernel.
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> --
>>>>>>> >> Manish Shakya
>>>>>>> >> http://www.manishshakya.com.np
>>>>>>> >>
>>>>>>> >> --
>>>>>>> >> unsubscribe: [EMAIL PROTECTED]
>>>>>>> >> website: http://groups.google.com/group/android-porting
>>>>>>> >
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> Manish Shakya
>>>>>>> http://www.manishshakya.com.np
>>>>>>> http://secs.oakland.edu/~ganesan/iMX/
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Manish Shakya
>>>>> http://www.manishshakya.com.np
>>>>> http://secs.oakland.edu/~ganesan/iMX/
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Manish Shakya
>>> http://www.manishshakya.com.np
>>> http://secs.oakland.edu/~ganesan/iMX/
>>>
>>
>>
>>
>> --
>> Manish Shakya
>> http://www.manishshakya.com.np
>> http://secs.oakland.edu/~ganesan/iMX/
>>
>
>


-- 
Manish Shakya
http://www.manishshakya.com.np
http://secs.oakland.edu/~ganesan/iMX/

-- 
unsubscribe: [EMAIL PROTECTED]
website: http://groups.google.com/group/android-porting