[Prev] Thread [Next]  |  [Prev] Date [Next]

Re: [dishmod] Re: 508 Hard drive marry with N3 card possible? afb Mon Nov 09 19:00:17 2009

You need a P082 or 084 or higher virgin firmware which has that drive 
listed in it, to marry the drive.

gromitsprinkles wrote:
> Nope, doesn't work without a valid card in the slot with the old 
> firmware installed. It'll power up and hang at either SNIC or Smart 
> Card not valid... I have found out at some other places that a valid 
> card needs to be seen by the firmware or else nothing happens, which 
> is what I'm seeing.
> This receiver was purchased privately and already had the G3 card, so 
> I don't have a Rom102 or Rom10 card for it. So it looks like I'll have 
> to make one.
> I'll try the P169 firmware on this site, I think it has the support 
> for the larger disk. The supported drives are listed in the clear 
> right in the firmware.
> Is it possible to just edit the firmware on these ancient versions 
> just to get it to accept the disk model number?
> Is there a way to create a version of firmware that's more modern for 
> marrying disk drives? I see my disk drive listed in my P407 TSOP, but 
> is there a way to prep this so it'll format with current firmware??


There will be no talk of anything to do with what appears to be illegal 
activity allowed on this group. there will be no second chance. all offenders 
will be banned. Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: