Re: Is 802.11a supposed to work with wpi?

On Tue, 29 Dec 2009, Paul B Mahol wrote:

> On 12/29/09, Doug Barton <[EMAIL PROTECTED]> wrote:
> > Paul B Mahol wrote:
> >> What are other debug printfs?
> >
> > I sent everything that came out of 'grep -i wpi /var/run/dmesg.boot'
> >
> >> # ifconfig wlan0 list chan
> >
> > Channel   1 : 2412  Mhz 11g          Channel  40 : 5200* Mhz 11a
> > Channel   2 : 2417  Mhz 11g          Channel  44 : 5220* Mhz 11a
> > Channel   3 : 2422  Mhz 11g          Channel  48 : 5240* Mhz 11a
> > Channel   4 : 2427  Mhz 11g          Channel  52 : 5260* Mhz 11a
> > Channel   5 : 2432  Mhz 11g          Channel  56 : 5280* Mhz 11a
> > Channel   6 : 2437  Mhz 11g          Channel  60 : 5300* Mhz 11a
> > Channel   7 : 2442  Mhz 11g          Channel  64 : 5320* Mhz 11a
> > Channel   8 : 2447  Mhz 11g          Channel 149 : 5745* Mhz 11a
> > Channel   9 : 2452  Mhz 11g          Channel 153 : 5765* Mhz 11a
> > Channel  10 : 2457  Mhz 11g          Channel 157 : 5785* Mhz 11a
> > Channel  11 : 2462  Mhz 11g          Channel 161 : 5805* Mhz 11a
> > Channel  36 : 5180* Mhz 11a          Channel 165 : 5825* Mhz 11a
> 
> While scanning does wpi0 uses 11a channels?
> How scan output should look like?
> Enable all wpi debug output (explore wpi source a little bit ... for
> documentation)

You need to set the tunable debug.wpi before loading the module.  Set it 
to 0x82, enable bootverbose and then load the module.  I see you also 
don't have the revision D hardware, which is the only one the driver 
actively knows about. 

It's also interesting that all the A channels are listed as being passive, 
what regdomain do you have set (ifconfig wlan0 will say)?  You could try 
changing the regdomain (IANAL) and see what happens.

Gavin
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"