Loading...

linux-cluster@redhat.com

[Prev] Thread [Next]  |  [Prev] Date [Next]

Re: [Linux-cluster] What does it means "rgmanager status 139"? emmanuel segura Tue Feb 28 05:00:25 2012

Do you something in your system log?

this it's so strange /usr/share/cluster/script.sh: line 115:  5532
Segmentation fault



Il giorno 28 febbraio 2012 13:00, C. L. Martinez <[EMAIL PROTECTED]> ha
scritto:

> On Tue, Feb 28, 2012 at 12:49 PM, emmanuel segura <[EMAIL PROTECTED]>
> wrote:
> > sorry martinez
> >
> > but i told you to try with rg_test start NOT noop
> >
> > because like the we can see every action when rgmanager try to make start
> > the service
> >
>
> Ok, start doesn't reports any problem, but status:
>
> [EMAIL PROTECTED] ~]# rg_test test /etc/cluster/cluster.conf status
> service splunksrv-svc
> Running in test mode.
> Loading resource rule from /usr/share/cluster/SAPInstance
> Loading resource rule from /usr/share/cluster/nfsserver.sh
> Loading resource rule from /usr/share/cluster/ocf-shellfuncs
> Loading resource rule from /usr/share/cluster/lvm_by_vg.sh
> Loading resource rule from /usr/share/cluster/ip.sh
> Loading resource rule from /usr/share/cluster/ASEHAagent.sh
> Loading resource rule from /usr/share/cluster/lvm_by_lv.sh
> Loading resource rule from /usr/share/cluster/samba.sh
> Loading resource rule from /usr/share/cluster/checkquorum
> Loading resource rule from /usr/share/cluster/service.sh
> Loading resource rule from /usr/share/cluster/apache.sh
> Loading resource rule from /usr/share/cluster/svclib_nfslock
> Loading resource rule from /usr/share/cluster/script.sh
> Loading resource rule from /usr/share/cluster/mysql.sh
> Loading resource rule from /usr/share/cluster/tomcat-6.sh
> Loading resource rule from /usr/share/cluster/SAPDatabase
> Loading resource rule from /usr/share/cluster/oralistener.sh
> Loading resource rule from /usr/share/cluster/vm.sh
> Loading resource rule from /usr/share/cluster/oracledb.sh
> Loading resource rule from /usr/share/cluster/lvm.sh
> Loading resource rule from /usr/share/cluster/openldap.sh
> Loading resource rule from /usr/share/cluster/fence_scsi_check.pl
> Loading resource rule from /usr/share/cluster/nfsclient.sh
> Loading resource rule from /usr/share/cluster/postgres-8.sh
> Loading resource rule from /usr/share/cluster/fs.sh
> Loading resource rule from /usr/share/cluster/netfs.sh
> Loading resource rule from /usr/share/cluster/named.sh
> Loading resource rule from /usr/share/cluster/nfsexport.sh
> Loading resource rule from /usr/share/cluster/orainstance.sh
> Loading resource rule from /usr/share/cluster/clusterfs.sh
> Checking status of splunksrv-svc...
> <debug>  Checking 192.168.44.4, Level 10
> <debug>  192.168.44.4 present on eth0
> <debug>  Link for eth0: Detected
> <debug>  Link detected on eth0
> <debug>  Local ping to 192.168.44.4 succeeded
> <info>   Executing /data/config/etc/init.d/splunksrv-cluster status
> + . /etc/init.d/functions
> ++ TEXTDOMAIN=initscripts
> ++ umask 022
> ++ PATH=/sbin:/usr/sbin:/bin:/usr/bin
> ++ export PATH
> ++ '[' -z '' ']'
> ++ COLUMNS=80
> ++ '[' -z '' ']'
> +++ /sbin/consoletype
> ++ CONSOLETYPE=pty
> ++ '[' -f /etc/sysconfig/i18n -a -z '' -a -z '' ']'
> ++ . /etc/profile.d/lang.sh
> ++ unset LANGSH_SOURCED
> ++ '[' -z '' ']'
> ++ '[' -f /etc/sysconfig/init ']'
> ++ . /etc/sysconfig/init
> +++ BOOTUP=color
> +++ RES_COL=60
> +++ MOVE_TO_COL='echo -en \033[60G'
> +++ SETCOLOR_SUCCESS='echo -en \033[0;32m'
> +++ SETCOLOR_FAILURE='echo -en \033[0;31m'
> +++ SETCOLOR_WARNING='echo -en \033[0;33m'
> +++ SETCOLOR_NORMAL='echo -en \033[0;39m'
> +++ PROMPT=yes
> +++ AUTOSWAP=no
> +++ ACTIVE_CONSOLES='/dev/tty[1-2]'
> +++ SINGLE=/sbin/sushell
> ++ '[' pty = serial ']'
> ++
> __sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
> + '[' '!' -d /data/splunk/instance/historydb ']'
> + prog=/data/soft/splunk/bin/splunk
> + pid_files='/data/soft/splunk/var/run/splunk/splunkd.pid
> /data/soft/splunk/var/run/splunk/splunkweb.pid'
> + options_up=start
> + options_down=stop
> + case "$1" in
> + status
> + for i in '$pid_files'
> + status -p /data/soft/splunk/var/run/splunk/splunkd.pid
> /usr/share/cluster/script.sh: line 115:  5532 Segmentation fault
> ${OCF_RESKEY_file} $1
> <err>    script:splunksrv-cluster: status of
> /data/config/etc/init.d/splunksrv-cluster failed (returned 139)
> [script] script:splunksrv-cluster: status of
> /data/config/etc/init.d/splunksrv-cluster failed (returned 139)
> Status check of splunksrv-svc failed
>
> Problem appears with this line:
>
> 113 # Don't need to catch return codes; this one will work.
> 114 ocf_log info "Executing ${OCF_RESKEY_file} $1"
> 115 ${OCF_RESKEY_file} $1
>
> Then I don't understand why. From command line works, when system
> starts and checks from a cron job works but when rgmanager does
> status, no .... why??
>
> --
> Linux-cluster mailing list
> [EMAIL PROTECTED]
> https://www.redhat.com/mailman/listinfo/linux-cluster
>



-- 
esta es mi vida e me la vivo hasta que dios quiera
--
Linux-cluster mailing list
[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/linux-cluster