Re: [vmaxtech] Driveshaft oil seal

Ron Ayers Motorsports has it for $7.91 + shipping.

http://www.ronayers.com/ProductDetails/N/687/SKU/1110298 



________________________________
 From: dan smith <[EMAIL PROTECTED]>
To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> 
Sent: Wednesday, February 15, 2012 11:10 AM
Subject: Re: [vmaxtech] Driveshaft oil seal
 

  


 
http://www.powersportsplus.com/parts/detail/yamaha/YP-93108-43013-00.html?gclid=CPuQlvnJoK4CFQF3hwodjWSy5Q
Dan Smith, President
Preferred Excavation Service Inc.

________________________________
From: Tony M <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] 
Sent: Wednesday, February 15, 2012 10:01 AM
Subject: RE: [vmaxtech] Driveshaft oil seal


  

It is not a typical oil seal, it is one that is fixed to the shaft and
contacts with the inside of the drive housing as it revolves, hence not
unique but a specialist part, also known as an 'external oil seal'

The dimensions are 23mm i/d x 43mm o/d by 10mm thick.  They cost $30 in the
UK but I cannot fins a 'local supplier' who has one, consequently "Does
anyone have an alternative suppliers part number ?, or knows where this part
is available from ?  if so they would be doing me a favour.

_____ 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Tim Brundage
Sent: 15 February 2012 17:08
To: [EMAIL PROTECTED]
Subject: Re: [vmaxtech] Driveshaft oil seal

Sorry, I read that wrong. I agree with Mitch

________________________________
From: Mitch Griffith <[EMAIL PROTECTED]
<mailto:griffith_mitch%40yahoo.com> >
To: "[EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com> "
<[EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com> > 
Sent: Wednesday, February 15, 2012 10:33 AM
Subject: Re: [vmaxtech] Driveshaft oil seal

Any local bearing suppy company would be able to get you a seal. You would
need the seal and or dimensions of seat and shaft Dia.

On Feb 15, 2012, at 9:24 AM, Tim Brundage <[EMAIL PROTECTED]
<mailto:justmeandmax2001%40yahoo.com> > wrote:

> Yeah you're probably right... I mean it's made to seal engines and
withstand 190* heat... SMH
> 
> ________________________________
> From: Tony M <[EMAIL PROTECTED] <mailto:maxcaddy%40tiscali.co.uk> >
> To: [EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com> 
> Sent: Wednesday, February 15, 2012 9:11 AM
> Subject: RE: [vmaxtech] Driveshaft oil seal
> 
> 
> 
> I don't think that would last 5 secs let alone 5 mins....
> 
> _____ 
> 
> From: [EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com>
[mailto:[EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com> ] On
Behalf
> Of Tim Brundage
> Sent: 15 February 2012 13:59
> To: [EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com> 
> Subject: Re: [vmaxtech] Driveshaft oil seal
> 
> You could always use form a gasket
> 
> ________________________________
> From: Tony M <[EMAIL PROTECTED] <mailto:maxcaddy%40tiscali.co.uk>
<mailto:maxcaddy%40tiscali.co.uk> >
> To: [EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com>
<mailto:vmaxtech%40yahoogroups.com> 
> Sent: Wednesday, February 15, 2012 7:07 AM
> Subject: [vmaxtech] Driveshaft oil seal
> 
> Hi,
> 
> There is an oil seal on the driveshaft where it enters the rear drive
which
> is Yamaha part no 93108-43013-00 
> 
> Does anyone have an alternative suppliers part number ?, or knows where
this
> part is available from ?, without paying extortionate stealer prices ?
> 
> Thanks
> 
> [Non-text portions of this message have been removed]
> 
> [Non-text portions of this message have been removed]
> 
> [Non-text portions of this message have been removed]
> 
> [Non-text portions of this message have been removed]
> 
> 

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


 

[Non-text portions of this message have been removed]