Re: [vmaxtech] Re: Rear Axle Washer

You don't want to remove the washer because that would change the 
geometry between the swingarm. Sorry that I cannot give dimensions of 
that spacer washer because it is currently moved inside. It's about 1/8" 
thick and the inside diameter has clearance to slide over the axle.
Rick4095

On 4/10/2012 6:45 AM, [EMAIL PROTECTED] wrote:
> Thanks, I've read all the threads on moving the washer to accomodate a
> wider tire. However, there has been no reference to removing the washer.
> Thanks all the same.
>
> Mark
>
> >
> > On the older generation Max's, depending on what washer you are refering
> > to, I think I remember reading that some people removed or moved a 
> washer
> > to keep the wider rear tire from rubbing on the swingarm. I may be 
> able to
> > dig up the details.
> > --- In [EMAIL PROTECTED] <mailto:vmaxtech%40yahoogroups.com>, 
> [EMAIL PROTECTED] wrote:
> >>
> >> Been following the tire poll. Reference is constantly made of the right
> >> hand washer on the rear axle. My '91 for some reason doesn't have one!
> >> Originally was running a 170/90/15 and now onto stock 150/90/15's. The
> >> washer isn't on the differential side either.
> >>
> >> Clearly I need to make a plan. Can anyone give me the dimensions of 
> that
> >> washer. Will be quicker to have one made up.
> >>
> >> TIA
> >>
> >> Mark
> >>
> >
> >
> >